Categories
Contact Us

Far East Group

 

Tel:86-523-88662888
Fax:86-523-88819222
E-mail:hongxi@yd-jd.com
Web:http://www.jsyd-ty.com

Add:Industrial Estate in The North Of Shengao Town, Jiangyan District, Taizhou, Jiangsu, China

Service Hotline
+86-523-88662888

News

Home > NewsContent

Liquefied Petroleum Gas Cylinder Testing Equipment Of The Main Work

Liquefied petroleum gas cylinder testing equipment, the main work is to detect the cylinder curing and drying, cylinder pumping and cylinder tightness of the test, we use the liquefied petroleum gas cylinder testing equipment, the cylinder curing and drying test, Should be based on the operation of the specified process to operate, can not miss any steps, of course, can not be unauthorized steps to change, LPG Gas Cylinder Testing Equipments so as to avoid unnecessary failure, when the liquefied petroleum gas cylinder testing equipment for air tightness test, Using the cylinder testing equipment will test the cylinder inside the sufficient gas, and then the entire cylinder completely soaked in the sink, but the depth of the surface can not be less than five centimeters, the cylinder slowly rotating to observe the surrounding the bottle wall is The emergence of bubbles, if the bubble is continuous, LPG Gas Cylinder Testing Equipments then it shows the existence of leakage of the cylinder phenomenon, that is the cylinder is not qualified.

And the final cylinder for the detection of the evacuation, in fact, the main use of the cylinder of the detection equipment to the cylinder inside the air completely empty, the main test step is to pump the pump open, and then the cooling water valve and power to open, after pumping the pump can To operate, and then have been evacuated cylinder out, will be evacuated the entire tube into the mouth of the valve into the mouth, LPG Gas Cylinder Testing Equipments and then open the angle valve and start taking the time to work, but when the value on the pressure gauge reaches the specified range, said the evacuation Work has ended, this time need to immediately close the angle valve, until all the work is over, will pump the pump off, and then close the cooling water valve.

Speaking of liquefied petroleum gas cylinder detection equipment, then, LPG Gas Cylinder Testing Equipments in fact, we can according to the situation of different gases to set. First of all, about inert gas gases, we can put liquefied petroleum gas cylinder testing equipment in the explosion-proof cabinets in the laboratory; or chains or other means of fixed; or connecting the pipeline to the laboratory, or directly placed It is possible to go to an ordinary house in the outdoors.

The above is the general description of the inert gas containing liquefied petroleum gas cylinder testing equipment, we are placed in the relatively casual. But on some flammable and explosive gases, such as acetylene, hydrogen, we may have to equipped with explosion-proof cylinder cabinet. And if we are moving in the time to pay attention to their cylinders, to ensure that there is a certain degree of security protection, LPG Gas Cylinder Testing Equipments and if necessary, then, there are certain measures to take security measures.

We should pay attention to the gas cylinders of liquefied petroleum gas cylinder testing equipment. We should pay attention to the fact that most of them are high pressure gas, so the safe use of cylinders is very important. We should pay attention to the following situations.

First of all, we have to test the laboratory have not prepared high-pressure gas cylinders safe use of work instructions to check to confirm that we can have a guide to know that we operate gas liquefied petroleum gas cylinder testing equipment; Moreover, we have to be responsible for whether the bottle Of the safety management to carry out inspection, and for the cylinder of the use of personnel, LPG Gas Cylinder Testing Equipments we had the best use of its safe use of a practical operation training.

Moreover, we have to regularly gas gas cylinder testing equipment for a comprehensive security checks, and we have a professional department issued a safety certificate can be.

For flammable gas liquefied petroleum gas cylinder testing equipment, we are not allowed to be placed in the laboratory, which must be stored separately, and also away from the heat of the fire, to ensure that its well ventilated, and put an end to its oxygen cylinder together; For inert gas liquefied petroleum gas cylinder testing equipment, it is also required to stay away from heat, as far as possible to avoid the sun, and have fixed measures, do not have severe vibration.